Airtac USA Solenoid Valve Model 3V210-08-NC-T

Note: These are genuine Airtac Valves with NPT pipe threads, they have glide rings on the spools and the lettering does not wipe off with solvent.  They are probably the most copied design in the world.  They are made in Taiwan, but also have a warehouse in Katy, Texas.  Airtac is a world class company that employs over 8,000 people worldwide.  We are an authorized Airtac Distributor.

  IN STOCK IN WEST BLOOMFIELD, MICHIGAN, USA 

Function:

        This is a 3 ported 3 Way Directional Control Valve used to move cylinders or actuators.  Supply pressure must be supplied to the supply port on the side of the valve with the 2 ports towards the spring end.  The outlet port on the opposite side is exhausted in the de-energized position.  When voltage is applied to the solenoid end of the valve, the valve spool will shift causing air to pressurize the outlet port.  Mufflers may be added to the exhaust port to quiet the air exhausting.  Adjustable Exhaust restrictors may be used to in the exhaust ports to control the speed of the cylinder.  If flow controls are used, they should always be placed in the lines between the cylinder and the outlet ports and control the air flow as it exhausts from the cylinder. 

Specifications:

          Media- Air (Minimum 40 micron filtration)

          No of positions and Ports- 2 Position, 3 Ports

          Flow- Cv=.78, Equivalent Orifice Area= 14 mm², (36.6 cubic feet per minute at 80 PSI)

          Port Size- IN OUT = 1/4 NPT, Exhaust= 1/4" NPT

          Voltage range- plus or minus 10%

          Pressure Range- 24PSI min to 100 PSI Maximum

          Wire Insulation- Class F

          Weight= .48 lbs